1.5 Mil Flat Plastic Bags
MrBox's Low Density Flat Bag is a basic plastic bag designed to handle a wide variety of packaging needs.
These bags can hold everything from small parts to all types of food items. They can also be heat sealed to provide security
and/or retain freshness.
Here's some important information:
• Made from virgin low and linear low density polyethylene.
• Dimensions represent the interior usable portion of the bag.
• Meet FDA requirements for use in food applications
• Bags 15” wide and under come in dispenser packs of 100 for cleanliness and convenience
• Bags are from seamless tubing and bottom sealed for extra strength, no side or slit seals
How to configure a plastic bag:
POLY BAG DIMENSIONS:
The first dimension stated when describing a poly bag is the width. All MrBoxOnline bagsmeasurements are inside diameter (ID).
Side Gusset Bags: Bottom Gusset Bags:
Order of Measurement
Width X Length plus gauge
Width X Gusset X Length plus gauge Width X Length X Gusset plus gauge
MEASURING FOR DRUM LINERS:
Width = (the circumference of the drum divided by 2) + 2”. It is easiest to use a flexible tape measure and measure around the widest part of the drum.
Length = (height of the drum + the width [diameter]) + 4”.
The extra 4” provides the extra material to fold over or tie the bag.
MEASURING FOR BOX LINERS:
Width = (the circumference of the box divided by 2) + 2”. The circumference equals the sum of the length of each side. Length = 1⁄2 the narrow width + the height of the box.
Add 5” to 8” extra material for fold over or tie off.
MEASURING FOR PALLET COVERS:
Width = (the circumference of the pallet divided by 2) + 4”. The circumference equals the sum of the length of each side. Length = (1/2 the narrow width of the load + the height
of the load) + 2”.